HP ML310 ProLiant ML310 Generation 2 Server User Guide - Page 49
Hot-Plug SATA and SAS Hard Drives, Hot-Plug SCSI Hard Drive LED Combinations
View all HP ML310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Hardware Options Installation 49 Hot-Plug SATA and SAS Hard Drives Hot-plug SATA and hot-plug SAS hard drives can be used interchangeably when a SAS controller is installed. The SATA controller is embedded, but before installing a hot-plug SAS hard drive, install the SAS controller ("SAS Controller" on page 50). To remove the component: CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank. 1. Determine the status of the hard drive from the hot-plug hard drive LEDs ("Hot-Plug SCSI Hard Drive LED Combinations" on page 18, "Hot-Plug SCSI Hard Drive LEDs" on page 17). 2. Back up all server data on the hard drive. 3. Disconnect the cables from the hot-plug SATA or SAS drive cage. 4. Remove the hard drive. To replace the component: 1. Remove the existing hard drive blank or hard drive from the drive bay.