HP ML310 ProLiant ML310 Generation 2 Server User Guide - Page 46
Non-Hot-Plug SCSI Hard Drive, Remove the access panel Removing the Access Panel
View all HP ML310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
46 HP ProLiant ML310 Generation 2 Server User Guide 2. Install the drive cage into the chassis, and secure with the six (6) Torx screws. 3. Connect the data and power cables to the rear of the installed hard drive. Non-Hot-Plug SCSI Hard Drive To remove the component: 1. Power down the server. 2. Remove the access panel ("Removing the Access Panel" on page 22). 3. Disconnect the power and data cables from the rear of the hard drive.
46
HP ProLiant ML310 Generation 2 Server User Guide
2.
Install the drive cage into the chassis, and secure with the six (6) Torx
screws.
3.
Connect the data and power cables to the rear of the installed hard drive.
Non-Hot-Plug SCSI Hard Drive
To remove the component:
1.
Power down the server.
2.
Remove the access panel ("Removing the Access Panel" on page
22
).
3.
Disconnect the power and data cables from the rear of the hard drive.