HP Mini 1000 HP Mini 1000 NetBook - Maintenance and Service Guide - Page 51
Bluetooth module, Top cover see
View all HP Mini 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Bluetooth module NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is included in the Cable Kit, spare part number 507708-001. Description Bluetooth module Spare part number 507706-001 Before removing the Bluetooth module, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 30). 5. Remove the following components: a. Keyboard (see Keyboard on page 33) b. Hard drive or solid-state drive (see Mass storage devices on page 35) c. Top cover (see Top cover on page 37) Remove the Bluetooth module: 1. Detach the Bluetooth module (1) from the system board. NOTE: The Bluetooth module is attached to the system board by double-sided tape. 2. Disconnect the Bluetooth module cable (2). Reverse this procedure to install the Bluetooth module. Component replacement procedures 43