HP Mini 1000 HP Mini 1000 NetBook - Maintenance and Service Guide - Page 55

Heat sink assembly, Hard drive or solid-state drive see

Get HP Mini 1000 - PC PDF manuals and user guides View all HP Mini 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Heat sink assembly Description Heat sink assembly Spare part number 515099-001 Before removing the heat sink assembly, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 30). 5. Remove the following components: a. Keyboard (see Keyboard on page 33) b. Hard drive or solid-state drive (see Mass storage devices on page 35) c. Top cover (see Top cover on page 37) d. WLAN module (see WLAN module on page 40) Remove the heat sink assembly: 1. Remove the two silver Phillips PM1.6×2.5 screws that secure the heat sink assembly to the system board (1). 2. Remove the heat sink assembly (2). Reverse this procedure to install the heat sink assembly. Component replacement procedures 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
Heat sink assembly
Description
Spare part number
Heat sink assembly
515099-001
Before removing the heat sink assembly, follow these steps:
1.
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the device.
3.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4.
Remove the battery (see
Battery
on page
30
).
5.
Remove the following components:
a.
Keyboard (see
Keyboard
on page
33
)
b.
Hard drive or solid-state drive (see
Mass storage devices
on page
35
)
c.
Top cover (see
Top cover
on page
37
)
d.
WLAN module (see
WLAN module
on page
40
)
Remove the heat sink assembly:
1.
Remove the two silver Phillips PM1.6×2.5 screws that secure the heat sink assembly to the system
board
(1)
.
2.
Remove the heat sink assembly
(2)
.
Reverse this procedure to install the heat sink assembly.
Component replacement procedures
47