HP Mini 1000 HP Mini 1000 NetBook - Maintenance and Service Guide - Page 58
Remove the two black Phillips PM2.0×8.0 screws
View all HP Mini 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
2. Lift the display assembly (2) straight up and remove it. 3. If it is necessary to replace the speakers, perform the following steps: a. Squeeze the sides of the speaker grill together to release the pressure clips, and then remove the speaker grill. The speaker grill is available using spare part number 506338-001. b. Remove the two black Phillips PM2.0×8.0 screws (1) that secure the speaker assembly to the display enclosure. All display assembly subcomponent screws (for 8.9-inch panels only) are available in the Display Screw Kit, spare part number 509700-001. 50 Chapter 4 Removal and replacement procedures
2.
Lift the display assembly
(2)
straight up and remove it.
3.
If it is necessary to replace the speakers, perform the following steps:
a.
Squeeze the sides of the speaker grill together to release the pressure clips, and then remove
the speaker grill. The speaker grill is available using spare part number 506338-001.
b.
Remove the two black Phillips PM2.0×8.0 screws
(1)
that secure the speaker assembly to the
display enclosure. All display assembly subcomponent screws (for 8.9-inch panels only) are
available in the Display Screw Kit, spare part number 509700-001.
50
Chapter 4
Removal and replacement procedures