HP Mini 1000 HP Mini 1000 NetBook - Maintenance and Service Guide - Page 56

Fan

Get HP Mini 1000 - PC PDF manuals and user guides View all HP Mini 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Fan NOTE: The fan spare part kit does not include a fan cable. The fan cable is included in the Cable Kit, spare part number 507708-001. Description Fan Spare part number 504615-001 Before removing the fan, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 30). 5. Remove the following components: a. Keyboard (see Keyboard on page 33) b. Hard drive or solid-state drive (see Mass storage devices on page 35) c. Top cover (see Top cover on page 37) d. System board (see System board on page 44) Remove the fan: 1. Remove the two black Phillips PM2.0×4.0 screws (1) that secure the fan to the base enclosure. 2. Remove the fan (2). Reverse this procedure to install the fan. 48 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
Fan
NOTE:
The fan spare part kit does not include a fan cable. The fan cable is included in the Cable Kit,
spare part number 507708-001.
Description
Spare part number
Fan
504615-001
Before removing the fan, follow these steps:
1.
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the device.
3.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4.
Remove the battery (see
Battery
on page
30
).
5.
Remove the following components:
a.
Keyboard (see
Keyboard
on page
33
)
b.
Hard drive or solid-state drive (see
Mass storage devices
on page
35
)
c.
Top cover (see
Top cover
on page
37
)
d.
System board (see
System board
on page
44
)
Remove the fan:
1.
Remove the two black Phillips PM2.0×4.0 screws
(1)
that secure the fan to the base enclosure.
2.
Remove the fan
(2)
.
Reverse this procedure to install the fan.
48
Chapter 4
Removal and replacement procedures