HP OMEN 15-ek0000 Maintenance and Service Guide - Page 43

and then remove the cover from the drive, Lift the drive to a 45° angle

Get HP OMEN 15-ek0000 PDF manuals and user guides View all HP OMEN 15-ek0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Table 5-2 Solid-state drive descriptions and part numbers Description 1 TB, PCIe, TLC 512 GB, PCIe, TLC 512 GB solid-state drive + 32 GB Optane memory module 256 GB, PCIe, TLC Solid-state drive thermal pad Spare part number L85348-001 L85360-001 L85366-001 L85350-001 L98956-001 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). 3. Disconnect the battery cable from the system board (Battery on page 37). Remove the solid-state drive: NOTE: Use the same procedure to remove both solid-state drives. 1. Remove the Phillips M2.0 × 5.0 screw that secures the drive to the computer (1). 2. Lift the drive to a 45° angle (2), and then remove the cover from the drive (3). 3. Pull the drive away to remove it from the socket (4). To install the solid-state drive, reverse the removal procedures. When installing a new solid-state drive, be sure to install the thermal pad to the inside of the cover. Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Table 5-2
Solid-state drive descriptions and part numbers
Description
Spare part number
1 TB, PCIe, TLC
L85348-001
512 GB, PCIe, TLC
L85360-001
512 GB solid-state drive + 32 GB Optane memory module
L85366-001
256 GB, PCIe, TLC
L85350-001
Solid-state drive thermal pad
L98956-001
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
31
).
2.
Remove the bottom cover (
Bottom cover
on page
31
).
3.
Disconnect the battery cable from the system board (
Battery
on page
37
).
Remove the solid-state drive:
NOTE:
Use the same procedure to remove both solid-state drives.
1.
Remove the Phillips M2.0 × 5.0 screw that secures the drive to the computer
(1)
.
2.
Lift the drive to a 45° angle
(2)
, and then remove the cover from the drive
(3)
.
3.
Pull the drive away to remove it from the socket
(4)
.
To install the solid-state drive, reverse the removal procedures.
When installing a new solid-state drive, be sure to install the thermal pad to the inside of the cover.
Component replacement procedures
33