HP OMEN 15-ek0000 Maintenance and Service Guide - Page 45
at an angle until it is seated
![]() |
View all HP OMEN 15-ek0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
NOTE: To protect a memory module after removal, place it in an electrostatic-safe container. To install a memory module: 1. Align the notched edge of the module with the tab in the slot (1), and then press the module into the slot at an angle until it is seated (2). 2. Press down on the module until the side retention clips snap into place (3). Component replacement procedures 35
![](/manual_guide/products/hewlettpackard-omen-15ek0000-maintenance-service-guide-15f1809/45.png)
NOTE:
To protect a memory module after removal, place it in an electrostatic-safe container.
To install a memory module:
1.
Align the notched edge of the module with the tab in the slot
(1)
, and then press the module into the slot
at an angle until it is seated
(2)
.
2.
Press down on the module until the side retention clips snap into place
(3)
.
Component replacement procedures
35