HP OMEN 15-ek0000 Maintenance and Service Guide - Page 44
Memory modules
![]() |
View all HP OMEN 15-ek0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion. Memory modules To remove the memory modules, use this procedure and illustration. Table 5-3 Memory module descriptions and part numbers Description 16 GB, DDR4-3200 8 GB, DDR4-3200 4 GB, DDR4-3200 Spare part number L67710-001 L46598-001 L83673-001 Before removing a memory module, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). 3. Remove the solid-state drive to the left of the battery (Solid-state drive on page 32). 4. Remove the battery (see Battery on page 37). If you are replacing a memory module, remove the existing memory module: ▲ Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle, and then remove the module (2). Use the same procedure to remove all memory modules. IMPORTANT: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. 34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
![](/manual_guide/products/hewlettpackard-omen-15ek0000-maintenance-service-guide-15f1809/44.png)