HP OMEN 15-ek0000 Maintenance and Service Guide - Page 49

Power connector cable, that secure the board to the computer.

Get HP OMEN 15-ek0000 PDF manuals and user guides View all HP OMEN 15-ek0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Before removing the RGB board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). 3. Remove the solid-state drive to the left of the battery (Solid-state drive on page 32). 4. Remove the battery (see Battery on page 37). Remove the RGB board: 1. Disconnect the four cables from the ZIF connectors on the RGB board (1)-(4). 2. Remove the two Phillips M2.0 × 4.0 screws (5) that secure the board to the computer. 3. Remove the RGB board from the computer (6). Reverse this procedure to install the RGB keyboard control board. Power connector cable To remove the power connector cable, use this procedure and illustration. Table 6-3 Power connector cable description and part number Description Power connector cable Spare part number L98734-001 Before removing the power connector cable, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Before removing the RGB board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
31
).
2.
Remove the bottom cover (
Bottom cover
on page
31
).
3.
Remove the solid-state drive to the left of the battery (
Solid-state drive
on page
32
).
4.
Remove the battery (see
Battery
on page
37
).
Remove the RGB board:
1.
Disconnect the four cables from the ZIF connectors on the RGB board
(1)–(4)
.
2.
Remove the two Phillips M2.0 × 4.0 screws
(5)
that secure the board to the computer.
3.
Remove the RGB board from the computer
(6)
.
Reverse this procedure to install the RGB keyboard control board.
Power connector cable
To remove the power connector cable, use this procedure and illustration.
Table 6-3
Power connector cable description and part number
Description
Spare part number
Power connector cable
L98734-001
Before removing the power connector cable, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
31
).
2.
Remove the bottom cover (
Bottom cover
on page
31
).
Component replacement procedures
39