HP OMEN 15-ek0000 Maintenance and Service Guide - Page 56

USB board, Remove the solid-state drives

Get HP OMEN 15-ek0000 PDF manuals and user guides View all HP OMEN 15-ek0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

NOTE: Use the same steps to remove each fan. 1. Disconnect the fan cable from the system board (1). 2. Remove the three Phillips M2.0 × 5.0 screws (2) that secure the fan to the computer. 3. Remove the fan from the computer (3). Reverse this procedure to install the fans. USB board To remove the USB board, use this procedure and illustration. Table 6-8 USB board description and part number Description USB board USB board cable Spare part number L98742-001 L98725-001 Before removing the USB board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). 3. Remove the solid-state drives (Solid-state drive on page 32). 4. Remove the battery (see Battery on page 37). 5. Remove the heat sink (see Heat sink on page 42). 6. Remove the right fan (see Fans on page 45). Remove the USB board: 46 Chapter 6 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
NOTE:
Use the same steps to remove each fan.
1.
Disconnect the fan cable from the system board
(1)
.
2.
Remove the three Phillips M2.0 × 5.0 screws
(2)
that secure the fan to the computer.
3.
Remove the fan from the computer
(3)
.
Reverse this procedure to install the fans.
USB board
To remove the USB board, use this procedure and illustration.
Table 6-8
USB board description and part number
Description
Spare part number
USB board
L98742-001
USB board cable
L98725-001
Before removing the USB board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
31
).
2.
Remove the bottom cover (
Bottom cover
on page
31
).
3.
Remove the solid-state drives (
Solid-state drive
on page
32
).
4.
Remove the battery (see
Battery
on page
37
).
5.
Remove the heat sink (see
Heat sink
on page
42
).
6.
Remove the right fan (see
Fans
on page
45
).
Remove the USB board:
46
Chapter 6
Removal and replacement procedures for authorized service provider parts