HP OMEN 15-ek0000 Maintenance and Service Guide - Page 61
Touchpad, Remove the Phillips M2.0 × 3.0 screw
View all HP OMEN 15-ek0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Table 6-11 IR board description and part number Description IR board IR board cable Spare part number L98743-001 L98726-001 Before removing the IR board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). 3. Remove the solid-state drives (Solid-state drive on page 32). 4. Remove the battery (see Battery on page 37). 5. Remove the fans (see Fans on page 45). 6. Remove the system board (see System board on page 48). Remove the IR board: 1. Remove the Phillips M2.0 × 3.0 screw (1) that secures the IR board to the computer. 2. Remove the IR board from the computer (2). Reverse this procedure to install the IR board. Touchpad To remove the touchpad, use this procedure and illustration. Component replacement procedures 51