HP OMEN 15-ek0000 Maintenance and Service Guide - Page 57
RJ-45 door, Remove the RJ-45 door
![]() |
View all HP OMEN 15-ek0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
1. Disconnect the cable from the system board ZIF connector (1). 2. Lift the cable to release it from the computer (2). 3. Remove the board from the computer (3). Reverse this procedure to install the USB board. RJ-45 door To remove the RJ-45 door, use this procedure and illustration. Table 6-9 RJ-45 door description and part number Description RJ-45 door for use in models with GeForce GTX 1660, 1660Ti, and RTX graphics cards RJ-45 door for use in models with GeForce GTX 1650, 1650Ti graphics cards Spare part number L98959-001 L99533-001 Before removing the RJ-45 door, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). Remove the RJ-45 door: 1. Use a flat tool to push the tab on the inside-bottom of the door toward the outside of the system board to release it (1). Component replacement procedures 47
![](/manual_guide/products/hewlettpackard-omen-15ek0000-maintenance-service-guide-15f1809/57.png)