HP OMEN 15-ek0000 Maintenance and Service Guide - Page 55
Fans, Prepare the computer for disassembly
View all HP OMEN 15-ek0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
5. (GeForce GTX 1650, 1650Ti graphics cards) Thoroughly clean the thermal material from the surfaces of the heat sink and the system board components each time the heat sink is removed. Replacement thermal material is included with the heat sink and system board spare part kits. The following illustration shows the replacement thermal material locations. Thermal paste is used on the system board components (1), (3), (5) and on the heat sink areas (2), (4), (6) that service them. Fans Reverse this procedure to install the heat sink. To remove the fans, use this procedure and illustration. Table 6-7 Fan description and part number Description Fan assembly for use in models with GeForce GTX 1660, 1660Ti, and RTX graphics cards Fan assembly for use in models with GeForce GTX 1650, 1650Ti graphics cards Spare part number L98737-001 L98738-001 Before removing the fans, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). 3. Remove the solid-state drives (Solid-state drive on page 32). 4. Remove the battery (see Battery on page 37). 5. Remove the heat sink (see Heat sink on page 42). Remove the fans: Component replacement procedures 45