HP OMEN X 17-ap000 OMEN X by 17 Laptop PC Maintenance and Service Guide - Page 49

SSD (M.2), Remove the SSD

Get HP OMEN X 17-ap000 PDF manuals and user guides View all HP OMEN X 17-ap000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

SSD (M.2) Description M.2 SATA SSD, PCIe NVMe TLC ● 128 GB 2280 M2 3 x 4 SS Value PA ● 1 TB 2280 M2 PCIe 3 x 4 SS NVMe TLC PA ● 256 GB 2280 M2 PCIe 3 x 4 SS NVMe TLC PA ● 512 GB 2280 M2 PCIe 3 x 4 SS NVMe TLC PA Spare part number 940617-001 940618-001 940619-001 940620-001 Before removing the SSD, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Base enclosure (see Base enclosure on page 38) b. Battery (see Battery on page 31) Remove the SSD: 1. Remove the Phillips screw (1) that secures the SSD to the system board. 2. Remove the SSD (2) by pulling the drive away from the slot at an angle. Reverse this procedure to install the SSD. Component replacement procedures 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
SSD (M.2)
Description
Spare part number
M.2 SATA SSD
, PCIe NVMe TLC
●
128 GB 2280 M2 3 x 4 SS Value PA
940617-001
●
1 TB 2280 M2 PCIe 3 x 4 SS NVMe TLC PA
940618-001
●
256 GB 2280 M2 PCIe 3 x 4 SS NVMe TLC PA
940619-001
●
512 GB 2280 M2 PCIe 3 x 4 SS NVMe TLC PA
940620-001
Before removing the SSD, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Base enclosure (see
Base enclosure
on page
38
)
b.
Battery (see
Battery
on page
31
)
Remove the SSD:
1.
Remove the Phillips screw
(1)
that secures the SSD to the system board.
2.
Remove the SSD
(2)
by pulling the drive away from the slot at an angle.
Reverse this procedure to install the SSD.
Component replacement procedures
37