HP OMEN X 17-ap000 OMEN X by 17 Laptop PC Maintenance and Service Guide - Page 53

Fan, Remove the fans

Get HP OMEN X 17-ap000 PDF manuals and user guides View all HP OMEN X 17-ap000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Fan NOTE: This is a standalone fan. The other fan is attached to the heat sink. Description Standalone fan Spare part number 940579-001 Before removing the fan, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Base enclosure (see Base enclosure on page 38) b. Battery (see Battery on page 31) Remove the fans: 1. Disconnect the fan cable (1) from the system board. 2. Remove the three Phillips screws (2) securing the fan to the computer. 3. Remove the fan (3). Reverse this procedure to install the fan. Component replacement procedures 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
Fan
NOTE:
This is a standalone fan. The other fan is attached to the heat sink.
Description
Spare part number
Standalone fan
940579-001
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Base enclosure (see
Base enclosure
on page
38
)
b.
Battery (see
Battery
on page
31
)
Remove the fans:
1.
Disconnect the fan cable
(1)
from the system board.
2.
Remove the three Phillips screws
(2)
securing the fan to the computer.
3.
Remove the fan
(3)
.
Reverse this procedure to install the fan.
Component replacement procedures
41