HP OMEN X 17-ap000 OMEN X by 17 Laptop PC Maintenance and Service Guide - Page 62

WLAN module, the WLAN module.

Get HP OMEN X 17-ap000 PDF manuals and user guides View all HP OMEN X 17-ap000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

WLAN module Description WLAN RT Cartier AC 2 x 2 Spare part number 924813-855 Before removing the WLAN module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Base enclosure (see Base enclosure on page 38) b. Battery (see Battery on page 31) c. Heat sink (see Heat sink with fan on page 42) d. System board (see System board on page 47) Remove the WLAN module: NOTE: The WLAN module is located under the system board. The system board must be removed to remove the WLAN module. 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The cables should already be disconnected before removing the system board. 2. Remove the Phillips screw (2) that secures the WLAN module to the system board. (The WLAN module tilts up.) 3. Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: WLAN modules are notched to prevent incorrect installation. 50 Chapter 6 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
WLAN module
Description
Spare part number
WLAN RT Cartier AC 2 x 2
924813-855
Before removing the WLAN module, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Base enclosure (see
Base enclosure
on page
38
)
b.
Battery (see
Battery
on page
31
)
c.
Heat sink (see
Heat sink with fan
on page
42
)
d.
System board (see
System board
on page
47
)
Remove the WLAN module:
NOTE:
The WLAN module is located under the system board. The system board must be removed to remove
the WLAN module.
1.
Disconnect the WLAN antenna cables
(1)
from the terminals on the WLAN module.
NOTE:
The cables should already be disconnected before removing the system board.
2.
Remove the Phillips screw
(2)
that secures the WLAN module to the system board. (The WLAN module tilts
up.)
3.
Remove the WLAN module
(3)
by pulling the module away from the slot at an angle.
NOTE:
WLAN modules are notched to prevent incorrect installation.
50
Chapter 6
Removal and replacement procedures for authorized service provider parts