HP OMEN X 17-ap000 OMEN X by 17 Laptop PC Maintenance and Service Guide - Page 52

Before removing the trunk, follow these steps, Remove the trunks

Get HP OMEN X 17-ap000 PDF manuals and user guides View all HP OMEN X 17-ap000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Before removing the trunk, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Base enclosure (see Base enclosure on page 38) b. Battery (see Battery on page 31) c. Speakers (see Speakers on page 45) Remove the trunks: 1. Remove four Phillips screws (1) securing the left and right trunk. 2. Remove the two Phillips screws securing the trunk bottom (2). 3. Remove the trunk (3). Reverse this procedure to install the trunk. 40 Chapter 6 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
Before removing the trunk, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Base enclosure (see
Base enclosure
on page
38
)
b.
Battery (see
Battery
on page
31
)
c.
Speakers (see
Speakers
on page
45
)
Remove the trunks:
1.
Remove four Phillips screws
(1)
securing the left and right trunk.
2.
Remove the two Phillips screws securing the trunk bottom
(2)
.
3.
Remove the trunk
(3)
.
Reverse this procedure to install the trunk.
40
Chapter 6
Removal and replacement procedures for authorized service provider parts