HP OmniBook 900 HP OmniBook 900 Reference Guide - Page 110
For Windows 2000, check the settings in Control Panel, Power Options, on the Power
View all HP OmniBook 900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Troubleshooting Solving Problems 4. Press F10 to Save and Exit the BIOS Setup utility. • For Windows 2000, check the settings in Control Panel, Power Options, on the Power Schemes tab. If the battery doesn't charge • Make sure the ac adapter is plugged into the power source. • If you're using a power strip, remove the ac adapter from the power strip and plug it directly into a wall outlet. • Check that the light on the ac adapter is on. • Check that the battery is fully installed and locked in place. • Turn off the OmniBook, then remove the battery and check that the battery contacts are clean. • Check that the ac adapter cables are fully plugged in. • Move the OmniBook away from any nearby heat source. Unplug the ac adapter and allow the battery to cool down. An elevated battery temperature prevents charging. • If available, try another battery and ac adapter. If the OmniBook stops responding • Press CTRL+ALT+DEL and end an application that is not responding. • Press the blue power button to suspend the OmniBook. Then press the blue button again to turn the OmniBook back on. • If nothing happens, insert a straightened paper clip into the system-off button on the left side of the OmniBook. Then press the blue power button to turn on the OmniBook. If the OmniBook doesn't suspend as expected • If you have a connection to another computer, the OmniBook doesn't suspend if the connection is actively in use. • If the OmniBook is performing an operation, it normally waits for the operation to finish. • For Windows 95, 98, or NT, if a CD-ROM drive is present, make sure auto insert notification is disabled. This is the default factory setting. (This is not required for Windows 2000.) 110 Reference Guide