HP OmniBook 900 HP OmniBook 900 Reference Guide - Page 90
Power Menu
View all HP OmniBook 900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Configuring the OmniBook Using BIOS Setup Power Menu If you're using Windows 98 in its standard power mode, power options you set in Power Management Control Panel override corresponding settings in the Power menu. If you're using Windows 2000, only the settings marked with * are used, and other settings in the Power menu are ignored. Setting Description Default Power Management Mode Disables time-outs, selects a combination of time-outs, or allows customized time-outs. Max Power Savings Smart CPU Mode Enables automatic CPU power savings when running on battery power. Absence of keyboard, mouse, and hard disk activity could cause slower CPU response. For a model without "900 B" after the serial number, this should normally be Off to avoid interfering with time sensitive operations- and this setting applies on both battery and ac power. On ("900 B") Off (non "900 B") Standby Time-out Sets the period of inactivity after which the computer goes from On to Standby power mode. 2 minutes Suspend Time-out Sets the period of inactivity after which the computer goes from Standby to Suspend power mode. (Skips Standby mode if that time-out is disabled.) 4 minutes Hibernate Time-out Sets whether the computer goes from Suspend to Hibernate power mode after the indicated period of inactivity. (Skips Suspend mode if that time-out is disabled.) 4 hours Hard Disk Time-out Sets the period of hard disk inactivity after which the hard disk stops spinning. Also affects a hard disk drive in the plug-in module bay. 2 minutes Time-out on AC Sets whether power management time-outs occur while the ac adapter is connected. Disabled Power Button Mode Sets the action of the blue power button when pressed for less than 4 seconds. Suspend Lid Switch Mode Sets the action when the OmniBook lid closes. Turn off LCD Resume on Serial Ring Sets whether the system resumes from Suspend if a ring signal is received. Enabled Resume on Time of Day Sets whether the system resumes from Suspend at a defined time of day. Disabled Resume Time Sets the 24-hour time when the system resumes from Suspend if enabled. Auto Suspend on Undock* Sets whether the OmniBook suspends after undocking. When Lid Closed Auto Turn-on on Dock* Sets whether the OmniBook turns on after docking. Enabled * For Windows 2000, only these settings are used. All other settings in this menu are ignored. 90 Reference Guide