HP PageWide Pro 452dn User Guide - Page 84

The computer or workstation might be set up incorrectly, The product is disabled

Page 84 highlights

The computer or workstation might be set up incorrectly 1. Check the network drivers, printer drivers, and the network redirection. 2. Verify that the operating system is configured correctly. The product is disabled, or other network settings are incorrect 1. Review the configuration page to check the status of the network protocol. Enable it if necessary. 2. Reconfigure the network settings if necessary. Wireless network issues ● Wireless connectivity checklist ● The product does not print, and the computer has a third-party firewall installed ● The wireless connection does not work after moving the wireless router or product ● Cannot connect more computers to the wireless product ● The wireless product loses communication when connected to a VPN ● The network does not appear in the wireless networks list ● The wireless network is not functioning Wireless connectivity checklist ● The product and the wireless router are turned on and have power. Also make sure the wireless radio in the product is turned on. ● The service set identifier (SSID) is correct. Print a configuration page to determine the SSID. If you are not sure the SSID is correct, run the wireless setup again. ● With secured networks, make sure the security information is correct. If the security information is incorrect, run the wireless setup again. ● If the wireless network is working correctly, try accessing other computers on the wireless network. If the network has Internet access, try connecting to the Internet over another wireless connection. ● The encryption method (AES or TKIP) is the same for the product as it is for the wireless access point, such as a wireless router (on networks using WPA security). ● The product is within the range of the wireless network. For most networks, the product must be within 30 m (100 ft) of the wireless access point (wireless router). ● Obstacles do not block the wireless signal. Remove any large metal objects between the access point and the product. Make sure poles, walls, or support columns containing metal or concrete do not separate the product and wireless access point. ● The product is located away from electronic devices that might interfere with the wireless signal. Many devices can interfere with the wireless signal including motors, cordless phones, security system cameras, other wireless networks, and some Bluetooth devices. ● The printer driver is installed on the computer. ● You have selected the correct printer port. ● The computer and product connect to the same wireless network. 74 Chapter 7 Solve problems ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113

The computer or workstation might be set up incorrectly
1.
Check the network drivers, printer drivers, and the network redirection.
2.
Verify that the operating system is
configured
correctly.
The product is disabled, or other network settings are incorrect
1.
Review the
configuration
page to check the status of the network protocol. Enable it if necessary.
2.
Reconfigure
the network settings if necessary.
Wireless network issues
Wireless connectivity checklist
The product does not print, and the computer has a third-party
firewall
installed
The wireless connection does not work after moving the wireless router or product
Cannot connect more computers to the wireless product
The wireless product loses communication when connected to a VPN
The network does not appear in the wireless networks list
The wireless network is not functioning
Wireless connectivity checklist
The product and the wireless router are turned on and have power. Also make sure the wireless radio in
the product is turned on.
The service set
identifier
(SSID) is correct. Print a
configuration
page to determine the SSID. If you are
not sure the SSID is correct, run the wireless setup again.
With secured networks, make sure the security information is correct. If the security information is
incorrect, run the wireless setup again.
If the wireless network is working correctly, try accessing other computers on the wireless network. If
the network has Internet access, try connecting to the Internet over another wireless connection.
The encryption method (AES or TKIP) is the same for the product as it is for the wireless access point,
such as a wireless router (on networks using WPA security).
The product is within the range of the wireless network. For most networks, the product must be within
30 m (100 ft) of the wireless access point (wireless router).
Obstacles do not block the wireless signal. Remove any large metal objects between the access point
and the product. Make sure poles, walls, or support columns containing metal or concrete do not
separate the product and wireless access point.
The product is located away from electronic devices that might interfere with the wireless signal. Many
devices can interfere with the wireless signal including motors, cordless phones, security system
cameras, other wireless networks, and some Bluetooth devices.
The printer driver is installed on the computer.
You have selected the correct printer port.
The computer and product connect to the same wireless network.
74
Chapter 7
Solve problems
ENWW