HP Pavilion 12-b000 Maintenance and Service Guide - Page 37

RTC battery, built into the battery.

Get HP Pavilion 12-b000 PDF manuals and user guides View all HP Pavilion 12-b000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

RTC battery Description RTC battery (includes cable and double-sided adhesive) Spare part number 841565-001 Before removing the RTC battery, follow these steps: 1. Shut down the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the slate. 3. Disconnect the power from the slate by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the slate. 4. Disconnect the slate from the keyboard/base. 5. Remove the display panel assembly (see Display panel assembly on page 22). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Release the RTC battery cable from the retention clips (2) built into the battery. 3. Detach the RTC battery (3) from the display back cover. (The RTC battery is attached to the display back cover with double-sided adhesive.) 4. Remove the RTC battery. Reverse this procedure to install the RTC battery. Component replacement procedures 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
RTC battery
Description
Spare part number
RTC battery (includes cable and double-sided adhesive)
841565-001
Before removing the RTC battery, follow these steps:
1.
Shut down the slate. If you are unsure whether the slate is
off
or in Hibernation, turn the slate on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the slate.
3.
Disconnect the power from the slate by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the slate.
4.
Disconnect the slate from the keyboard/base.
5.
Remove the display panel assembly (see
Display panel assembly
on page
22
).
Remove the RTC battery:
1.
Disconnect the RTC battery cable
(1)
from the system board.
2.
Release the RTC battery cable from the retention clips
(2)
built into the battery.
3.
Detach the RTC battery
(3)
from the display back cover. (The RTC battery is attached to the display
back cover with double-sided adhesive.)
4.
Remove the RTC battery.
Reverse this procedure to install the RTC battery.
Component replacement procedures
29