HP Pavilion 12-b000 Maintenance and Service Guide - Page 40

Solid-state drive, Remove the Phillips PM2.0×2.9 screw

Get HP Pavilion 12-b000 PDF manuals and user guides View all HP Pavilion 12-b000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Solid-state drive NOTE: This section applies only to slate models equipped with an Intel Atom x7-Z8700 processor. Description 256-GB, 2280, M2, SATA-3 solid-state drive supporting TLC 128-GB, 2280, M2, SATA-3 solid-state drive Spare part number 760615-018 827560-007 Before removing the WLAN module, follow these steps: 1. Shut down the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the slate. 3. Disconnect the power from the slate by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the slate. 4. Disconnect the slate from the keyboard/base. 5. Remove the display panel assembly (see Display panel assembly on page 22). Remove the solid-state drive: 1. Remove the Phillips PM2.0×2.9 screw (1) that secures the solid-state drive to the display back cover. (The solid-state drive tilts up.) 2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle. Reverse this procedure to install the solid-state drive. 32 Chapter 5 Slate removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Solid-state drive
NOTE:
This section applies only to slate models equipped with an Intel Atom x7-Z8700 processor.
Description
Spare part number
256-GB, 2280, M2, SATA-3 solid-state drive supporting TLC
760615-018
128-GB, 2280, M2, SATA-3 solid-state drive
827560-007
Before removing the WLAN module, follow these steps:
1.
Shut down the slate. If you are unsure whether the slate is
off
or in Hibernation, turn the slate on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the slate.
3.
Disconnect the power from the slate by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the slate.
4.
Disconnect the slate from the keyboard/base.
5.
Remove the display panel assembly (see
Display panel assembly
on page
22
).
Remove the solid-state drive:
1.
Remove the Phillips PM2.0×2.9 screw
(1)
that secures the solid-state drive to the display back cover.
(The solid-state drive tilts up.)
2.
Remove the solid-state drive
(2)
by pulling the drive away from the slot at an angle.
Reverse this procedure to install the solid-state drive.
32
Chapter 5
Slate removal and replacement procedures