HP Pavilion 12-b000 Maintenance and Service Guide - Page 49

Slate docking cable, Release the slate docking cable from the retention clips

Get HP Pavilion 12-b000 PDF manuals and user guides View all HP Pavilion 12-b000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Slate docking cable Description Slate docking cable (includes connector and double-sided adhesive) Spare part number 841549-001 Before removing the slate docking cable, follow these steps: 1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect the power from the slate by unplugging the power cord from the slate. 3. Disconnect all external devices from the slate. 4. Disconnect the slate from the keyboard/base. 5. Remove the display panel assembly (see Display panel assembly on page 22). Remove the slate docking cable: 1. Disconnect the slate docking cable (1) from the system board. 2. Release the slate docking cable from the retention clips (2) built into the battery. 3. Remove the two Phillips PM2.0×3.8 screws (3) that secure the slate docking cable to the display back cover. 4. Remove the slate docking cable (4). Reverse this procedure to install the slate docking cable. Component replacement procedures 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Slate docking cable
Description
Spare part number
Slate docking cable (includes connector and double-sided adhesive)
841549-001
Before removing the slate docking cable, follow these steps:
1.
Turn
off
the slate. If you are unsure whether the slate is
off
or in Hibernation, turn the slate on, and then
shut it down through the operating system.
2.
Disconnect the power from the slate by unplugging the power cord from the slate.
3.
Disconnect all external devices from the slate.
4.
Disconnect the slate from the keyboard/base.
5.
Remove the display panel assembly (see
Display panel assembly
on page
22
).
Remove the slate docking cable:
1.
Disconnect the slate docking cable
(1)
from the system board.
2.
Release the slate docking cable from the retention clips
(2)
built into the battery.
3.
Remove the two Phillips PM2.0×3.8 screws
(3)
that secure the slate docking cable to the display
back cover.
4.
Remove the slate docking cable
(4)
.
Reverse this procedure to install the slate docking cable.
Component replacement procedures
41