HP Pavilion 12-b000 Maintenance and Service Guide - Page 55
TouchPad board, attached to the keyboard/top cover with double-sided adhesive.
View all HP Pavilion 12-b000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
TouchPad board Description Spare part number TouchPad board 841561-001 TouchPad board cable (includes double-sided adhesive) 841552-001 TouchPad board bracket (included with the TouchPad board spare part kit, spare part number 841561-001) Before removing the TouchPad board, follow these steps: 1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect the power from the slate by unplugging the power cord from the slate. 3. Disconnect all external devices from the slate. 4. Remove the bottom cover (see Bottom cover on page 44). Remove the TouchPad board: 1. Release the ZIF connector (1) to which the TouchPad board cable is attached, and then disconnect the TouchPad board cable from the docking board. 2. Detach the TouchPad board cable (2) from the keyboard/top cover. (The TouchPad board cable is attached to the keyboard/top cover with double-sided adhesive.) 3. Release the ZIF connector (3) to which the keyboard cable is attached, and then disconnect the keyboard cable from the docking board. 4. Detach the keyboard cable (4) from the keyboard/top cover. (The keyboard cable is attached to the keyboard/top cover with double-sided adhesive.) 5. Remove the three Phillips PM2.0×2.5 screws (5) that secure the TouchPad board bracket to the keyboard/top cover. Keyboard/base component replacement procedures 47