HP Pavilion 12-b000 Maintenance and Service Guide - Page 41

Speakers, Release the right speaker cable from the routing clips

Get HP Pavilion 12-b000 PDF manuals and user guides View all HP Pavilion 12-b000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Speakers Description Speaker Kit (includes left and right speakers and cables) Spare part number 841570-001 Before removing the speakers, follow these steps: 1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect the power from the slate by unplugging the power cord from the slate. 3. Disconnect all external devices from the slate. 4. Disconnect the slate from the keyboard/base. 5. Remove the display panel assembly (see Display panel assembly on page 22). Remove the speakers: 1. Disconnect the left and right speaker cables (1) from the speaker connectors on the system board. 2. Release the right speaker cable from the routing clips (2) built into the battery. 3. Remove the four Phillips PM2.0×3.8 screws (3) that secure the speakers to the display back cover. 4. Remove the speakers (4). Reverse this procedure to install the speakers. Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Speakers
Description
Spare part number
Speaker Kit (includes left and right speakers and cables)
841570-001
Before removing the speakers, follow these steps:
1.
Turn
off
the slate. If you are unsure whether the slate is
off
or in Hibernation, turn the slate on, and then
shut it down through the operating system.
2.
Disconnect the power from the slate by unplugging the power cord from the slate.
3.
Disconnect all external devices from the slate.
4.
Disconnect the slate from the keyboard/base.
5.
Remove the display panel assembly (see
Display panel assembly
on page
22
).
Remove the speakers:
1.
Disconnect the left and right speaker cables
(1)
from the speaker connectors on the system board.
2.
Release the right speaker cable from the routing clips
(2)
built into the battery.
3.
Remove the four Phillips PM2.0×3.8 screws
(3)
that secure the speakers to the display back cover.
4.
Remove the speakers
(4)
.
Reverse this procedure to install the speakers.
Component replacement procedures
33