HP Pavilion 700 HP Pavilion Desktop PCs - (English) Quick Start Guide 5971-583 - Page 57
Warning
View all HP Pavilion 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Internet Locate the RJ-45 port on the back of the computer. (Refer to the illustration that matches your system.) RJ-45 port To connect the network interface adapter to the network: 1 Plug the network cable into the RJ-45 port on the network adapter. The port is located on the back of the computer. Note: Do not connect a telephone cable (RJ-11 connector) to the network adapter port (RJ-45). 2 Plug the other end of the network cable into a 10BaseT or a 100BaseT port on the network hub. Note: The hub is a device to which all computers on the network are connected. Warning: DO NOT plug the network cable into a telephone jack. 3 With the computer turned on, check the light-emitting diodes (LEDs) on the network adapter. The LEDs on each type of network adapter are described below. (Refer to the illustration that matches your system.) LEDs 3 10 LNK - Lit green when connected to a 10BaseT port 3 100 LNK - Lit green when connected to a 100BaseT port 3 ACT - Lit during network data transfer activity Quick Start Guide 35