HP Pavilion dv7-6b00 HP Pavilion dv7 Notebook PC Maintenance and Service Guide - Page 59
Hard drive, Remove the hard drive
View all HP Pavilion dv7-6b00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Hard drive NOTE: The hard drive spare part kit does not include the bracket, connector cable, Mylar shield, or screws. The bracket, connector cable, Mylar shield, and screws are included in the Hard Drive Hardware Kit, spare part number 665597-001. NOTE: The computer can be equipped with up to two hard drives. The primary hard drive is installed in the right hard drive bay. The secondary hard drive is installed in the left hard drive bay. Description 1-TB, 5400-rpm, 12.7-mm 750-GB, 7200-rpm, 9.5-mm 750-GB, 5400-rpm, 9.5-mm 640-GB, 5400-rpm, 9.5-mm 500-GB, 7200-rpm, 9.5-mm 500-GB, 5400-rpm, 9.5-mm 320-GB, 7200-rpm, 9.5-mm 320-GB, 5400-rpm, 9.5-mm 160-GB solid-state drive (does not include bracket, connector cable, Mylar shield, or screws) Spare part number 638974-001 633252-001 634250-001 603785-001 608218-001 634932-001 634862-001 622643-001 665985-001 Before removing a hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 47). 5. Remove the service cover (see Optical drive on page 48). Remove the hard drive: NOTE: Steps 1 through 3 apply to the primary hard drive. See steps 4 through 7 for secondary hard drive removal information. 1. Disconnect the hard drive cable (1) from the system board. 2. Remove the four Philllips PM2.5×5.0 screws (2) that secure the hard drive to the computer. Component replacement procedures 51