HP Pavilion dv7-6b00 HP Pavilion dv7 Notebook PC Maintenance and Service Guide - Page 80
SD Card reader board, Release the ZIF connector to which the SD Card reader board cable is connected
View all HP Pavilion dv7-6b00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
SD Card reader board NOTE: The SD Card reader board does not include the SD Card reader board cable. The SD Card reader board cable is included in the Cable Kit, spare part number 665593-001. Description SD Card reader board Spare part number 665602-001 Before removing the SD Card reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 47), and then remove the following components: ● Optical drive (see Optical drive on page 48) ● Hard drive (see Hard drive on page 51) ● Keyboard (see Keyboard on page 59) ● Top cover (see Top cover on page 62) Remove the SD Card reader board and cable: 1. Release the ZIF connector to which the SD Card reader board cable is connected, and then disconnect the SD Card reader board cable (1) from the system board. 2. Remove the two Phillips PM2.5×5.0 screws (2) that secure the SD Card reader board to the base enclosure. 72 Chapter 4 Removal and replacement procedures