HP Pavilion dv7-6b00 HP Pavilion dv7 Notebook PC Maintenance and Service Guide - Page 60

Remove the four Phillips PM3.0×4.0 screws

Get HP Pavilion dv7-6b00 PDF manuals and user guides View all HP Pavilion dv7-6b00 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

3. Remove the hard drive (3). 4. Disconnect the hard drive cable (1) from the system board. 5. Release the hard drive cable (2) from the routing channel built into the base enclosure. 6. Remove the four Philllips PM2.5×5.0 screws (3) that secure the hard drive to the computer. 7. Remove the hard drive (4). 8. If it is necessary to replace the hard drive bracket or hard drive connector cable: a. Remove the four Phillips PM3.0×4.0 screws (1) that secure the hard drive bracket to the hard drive. b. Remove the hard drive bracket (2) from the hard drive. 52 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
3.
Remove the hard drive
(3)
.
4.
Disconnect the hard drive cable
(1)
from the system board.
5.
Release the hard drive cable
(2)
from the routing channel built into the base enclosure.
6.
Remove the four Philllips PM2.5×5.0 screws
(3)
that secure the hard drive to the computer.
7.
Remove the hard drive
(4)
.
8.
If it is necessary to replace the hard drive bracket or hard drive connector cable:
a.
Remove the four Phillips PM3.0×4.0 screws
(1)
that secure the hard drive bracket to the
hard drive.
b.
Remove the hard drive bracket
(2)
from the hard drive.
52
Chapter 4
Removal and replacement procedures