HP Pavilion n3402 HP Pavilion Notebook PC N3300 & N3400 Series - Setup Gu - Page 72

Making Connections Connecting External Components Switching the display to the external monitor • Close the computer lid. -or- • Press Fn+F12 (or CTRL+ALT+F12 on an external keyboard) to cycle through the display options: Pavilion Notebook display, external monitor, both. Adjusting monitor resolution 1. Click Start, Settings, Control Panel, Display. 2. On the Settings tab, adjust the Screen area. Using dual display mode You can extend the desktop by connecting an external monitor to your Pavilion Notebook. With Windows 98 SE and Windows ME, the dual display control panel is already installed. Dual display mode requires that your computer display be set as shown in the table below. Click Start, Settings, Control Panel, Display, Settings Tab to adjust these settings. Pavilion Notebook screen Screen area Colors 12-inch 800×600 pixels 256 colors or High Color (16 bit) 14-inch 800×600 pixels 256 colors 1024×768 pixels 1. Set your Pavilion Notebook display settings according to the table above. 2. Click the Start Button and select Shut down. 3. Connect the monitor cable from the monitor to the VGA port on the rear of the computer or on the port replicator. 4. Connect the monitor to a power source and turn it on. 5. Press the blue power button to turn on the computer. Windows will detect the second monitor and attempt to load the proper display driver. Follow the onscreen instructions. 6. Click Start, Settings, Control Panel, Display, Settings Tab. Position the second monitor to the right or left of your Pavilion Notebook display to match your monitor location. 72 Setup Guide