HP Photosmart D7400 Basics Guide - Page 33
Weak signal, Cannot connect to network during setup, Solution, Broadcast SSID, Cause
View all HP Photosmart D7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Troubleshooting and support Solution: Access the router's Embedded Web Server and turn on the Broadcast SSID option. See the user guide that came with your wireless router for information on how to access the Embedded Web Server and check the Broadcast SSID setting. For more information, see: "Connect to an integrated wireless WLAN 802.11 network" on page 9 Cause: The wireless router (infrastructure) or computer (ad hoc) is too far from the HP Photosmart or there is interference. Solution: In order to establish a good signal between the HP Photosmart and wireless router (infrastructure) or computer (ad hoc), you might have to experiment a bit. Assuming the equipment is functioning properly, try doing the following things separately or in combination: • If there is a long distance between your computer or wireless router and the HP Photosmart, move them closer together. • If there are metal objects (such as a metal bookcase or refrigerator) in the transmission path, clear the path between the HP Photosmart and the computer or wireless router. • If a cordless telephone, microwave, or other device that emits radio signals transmitting at 2.4 GHz is nearby, move it farther away to reduce radio interference. • If your computer or wireless router is near an external wall, move them away from the wall. Cause: Your network name (SSID) may be at the bottom of the SSID list that is displayed when you install the HP Photosmart on a wireless network. Solution: Touch to scroll to the bottom of the list. Infrastructure entries are listed first, ad hoc last. Weak signal Cause: The HP Photosmart is too far away from the wireless router or there is interference. Solution: In order to establish a good signal between the HP Photosmart and the wireless router, you might have to experiment a bit. Assuming the equipment is functioning properly, try doing the following things separately or in combination: • If there is a long distance between your computer or wireless router and the HP Photosmart, move them closer together. • If there are metal objects (such as a metal bookcase or refrigerator) in the transmission path, clear the path between the HP Photosmart and the computer or wireless router. • If a cordless telephone, microwave, or other device that emits radio signals transmitting at 2.4 GHz is nearby, move it farther away to reduce radio interference. • If your computer or wireless router is near an external wall, move them away from the wall. Cannot connect to network during setup Cause: The equipment is not turned on. Solution: Turn on the networked devices, such as the wireless router for an infrastructure network, or the computer for an ad hoc network. For more information on how to turn on the wireless router, see the documentation that came with your wireless router. Cause: The HP Photosmart is not receiving a signal. Solution: Move the wireless router and the HP Photosmart closer together. Then run the wireless setup again. For more information, see: "Integrated wireless WLAN 802.11 network setup" on page 8 Cause: If you manually entered your network name (SSID), you might have entered it incorrectly. Network troubleshooting 31