HP Photosmart D7400 Basics Guide - Page 8
What you need for a wired network, CAT-5 Ethernet cable.
View all HP Photosmart D7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Chapter 2 Network setup To set up the HP Photosmart on a wired network, you need to do the following: First, collect all of the required materials. Next, connect to a wired network. Finally, install the software. See this section: "What you need for a wired network" on page 6 "Connect the HP Photosmart to the network" on page 7 "Install the software for a network connection" on page 14 What you need for a wired network Before you connect the HP Photosmart to a network, make sure you have all of the required materials. ❑ A functional Ethernet network that includes a router, switch, or hub with an Ethernet port. ❑ CAT-5 Ethernet cable. Although standard Ethernet cables look similar to standard telephone cables, they are not interchangeable. There is a different number of wires in each one, and each has a different connector. An Ethernet cable connector (also called an RJ-45 6 Network setup