HP ProBook 6360b HP ProBook 6360b Notebook PC - Maintenance and Service Guide - Page 113
RJ-11 connector cable, Remove the ExpressCard board and cable
View all HP ProBook 6360b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
e. Fan (see Fan on page 76) f. Heat sink (see Heat sink on page 78) g. Base enclosure cover (see Base enclosure cover on page 82) h. Display assembly (see Display assembly on page 89) i. System board (see System board on page 96) Remove the ExpressCard assembly: 1. Position the top cover upside-down, with the front toward you. 2. Remove the three Phillips PM2.5×5.0 screws (1) that secure the assembly to the top cover. 3. Lift the tab of the assembly (2) until it disengages from the opening in the top cover. 4. Remove the ExpressCard board and cable (3) from the top cover. Reverse this procedure to install the ExpressCard assembly. RJ-11 connector cable NOTE: The RJ-11 connector cable is included in the Cable Kit, spare part number 639473-001. Before removing the RJ-11 connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. Component replacement procedures 105