HP ProBook 6360b HP ProBook 6360b Notebook PC - Maintenance and Service Guide - Page 87

from the computer.

Get HP ProBook 6360b PDF manuals and user guides View all HP ProBook 6360b manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

3. Lift the right side of the heat sink (1) to disengage it from the system board. 4. Rotate and lift the heat sink counter-clockwise (2) to clear the base enclosure, and then remove it from the computer. NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink (1) each time the heat sink is removed. Thermal material is included with all heat sink and processor spare part kits. Reverse this procedure to install the heat sink. Component replacement procedures 79

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
3.
Lift the right side of the heat sink
(1)
to disengage it from the system board.
4.
Rotate and lift the heat sink counter-clockwise
(2)
to clear the base enclosure, and then remove it
from the computer.
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the heat sink
(1)
each
time the heat sink is removed. Thermal material is included with all heat sink and processor spare part
kits.
Reverse this procedure to install the heat sink.
Component replacement procedures
79