HP ProLiant ML310e HP ProLiant ML310e Gen8 Server User Guide - Page 21
Install the access panel, Remove the air baffle
View all HP ProLiant ML310e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
c. Lift the access panel away from the chassis. Install the access panel 1. Install the access panel: a. Place the access panel on the chassis, and slide it toward the front of the server. b. Tighten the thumbscrew. 2. Lock the tower bezel. Remove the air baffle CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize the amount of time the access panel is open. Operations 21
Operations 21
c.
Lift the access panel away from the chassis.
Install the access panel
1.
Install the access panel:
a.
Place the access panel on the chassis, and slide it toward the front of the server.
b.
Tighten the thumbscrew.
2.
Lock the tower bezel.
Remove the air baffle
CAUTION:
For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.