HP ProLiant ML310e HP ProLiant ML310e Gen8 Server User Guide - Page 32
Installing a hot-plug drive, all bays are populated with either a component or a blank.
View all HP ProLiant ML310e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
7. Install the drive. 8. Close and lock the tower bezel. 9. Connect each power cord to the server. 10. Connect each power cord to the power source. 11. Power up the server (on page 18). Installing a hot-plug drive CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank. To install the component: 1. Unlock and open the tower bezel ("Unlock the tower bezel" on page 19). 2. Remove the drive blank. Hardware options installation 32
Hardware options installation 32
7.
Install the drive.
8.
Close and lock the tower bezel.
9.
Connect each power cord to the server.
10.
Connect each power cord to the power source.
11.
Power up the server (on page
18
).
Installing a hot-plug drive
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To install the component:
1.
Unlock and open the tower bezel ("
Unlock the tower bezel
" on page
19
).
2.
Remove the drive blank.