HP ProLiant ML310e HP ProLiant ML310e Gen8 Server User Guide - Page 34
Remove the drive cage assembly., Loosen the bracket thumbscrew
View all HP ProLiant ML310e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
7. Disconnect the drive cage cables: a. Disconnect the Mini-SAS cable from the system board or from the storage controller option. b. Disconnect the drive power cable from the 10-pin power supply connector. 8. Remove the drive cage assembly. 9. Loosen the bracket thumbscrew, and then remove the non-hot-plug bracket assembly from the drive cage. For image clarity, the non-hot-plug Mini-SAS and power cables attached to the bracket are not shown in the following figure. Hardware options installation 34
Hardware options installation 34
7.
Disconnect the drive cage cables:
a.
Disconnect the Mini-SAS cable from the system board or from the storage controller option.
b.
Disconnect the drive power cable from the 10-pin power supply connector.
8.
Remove the drive cage assembly.
9.
Loosen the bracket thumbscrew, and then remove the non-hot-plug bracket assembly from the drive
cage.
For image clarity, the non-hot-plug Mini-SAS and power cables attached to the bracket are not shown
in the following figure.