HP ProLiant ML310e HP ProLiant ML310e Gen8 Server User Guide - Page 38

all bays are populated with either a component or a blank.

Get HP ProLiant ML310e PDF manuals and user guides View all HP ProLiant ML310e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

9. Install the SFF drive cage assembly. 10. Connect the drive backplane cables: a. Connect the power cable to the backplane. b. Connect the Mini-SAS cables to the backplane and to a storage controller option. For cable routing information, see "Eight-bay SFF drive cabling (on page 63)." 11. Install the drives ("Drive options" on page 30). CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank. 12. Install the air baffle (on page 22). 13. Install the access panel (on page 21). 14. Install the tower bezel (on page 19). 15. Connect each power cord to the server. Hardware options installation 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Hardware options installation 38
9.
Install the SFF drive cage assembly.
10.
Connect the drive backplane cables:
a.
Connect the power cable to the backplane.
b.
Connect the Mini-SAS cables to the backplane and to a storage controller option.
For cable routing information, see "Eight-bay SFF drive cabling (on page
63
)."
11.
Install the drives ("
Drive options
" on page
30
).
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
12.
Install the air baffle (on page
22
).
13.
Install the access panel (on page
21
).
14.
Install the tower bezel (on page
19
).
15.
Connect each power cord to the server.