HP ProLiant ML330e Compaq ProLiant ML330e/ ML330 Server Maintenance and Servic - Page 29
Compaq ProLiant ML330e/ML330 Server Maintenance and Service Guide, To replace the power switch and LED
View all HP ProLiant ML330e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
2-16 Compaq ProLiant ML330e/ML330 Server Maintenance and Service Guide 5. From the front of the chassis, squeeze the sides of the power switch to disengage the two retainer clips from the chassis , and then gently remove the power switch from the chassis . 6. Also from the front of the chassis, squeeze the side of the LED to disengage the two retainer clips from the chassis , and then gently remove the LED from the chassis . 1 1 2 4 3 Figure 2-12. Removing the power switch and LED To replace the power switch and LED, reverse steps 2 through 6.
2-16
Compaq ProLiant ML330e/ML330 Server Maintenance and Service Guide
5. From the front of the chassis, squeeze the sides of the power switch to disengage the two
retainer clips from the chassis
, and then gently remove the power switch from the
chassis
.
6. Also from the front of the chassis, squeeze the side of the LED to disengage the two
retainer clips from the chassis
, and then gently remove the LED from the chassis
.
1
1
3
4
2
Figure 2-12.
Removing the power switch and LED
To replace the power switch and LED, reverse steps 2 through 6.