HP ProLiant ML330e Compaq ProLiant ML330e/ ML330 Server Maintenance and Servic - Page 50
What it is, How to run it, BEZEL:REMOVING, WARNING, resets - proliant ml330 base system device
View all HP ProLiant ML330e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3-4 Compaq ProLiant ML330e/ML330 Server Maintenance and Service Guide Table 3-1 Diagnostics Tools continued Tool What it is ROM Based Setup Utility (RBSU) for the ProLiant ML330e server Utility used to configure some hardware installed in or connected to the server. Specifically, it can: Resolve resource conflicts in areas such as memory, port addresses, and interrupts (IRQs) Configure PCI boards automatically Provide switch and jumper settings Manage installation of memory, processor upgrades, and mass storage devices such as hard drives, tape drives, and diskette drives Store configuration information in nonvolatile memory Configure the platform for an operating system Automatic Server Recovery (ASR) A tool that lets the server restart automatically after a catastrophic operating system failure, including software errors, OS lockups, environmental abnormalities, and some hardware errors. Unattended recovery logs the error information to the FRONT BEZEL:REMOVING, WARNING, resets the server, and tries to restart the operating system. ROMPaq Utility A utility that upgrades the current system ROM. SmartStart Diskette Builder Creates a diskette version of the utility from the SmartStart and Support Software CD. How to run it Run RBSU directly from the system ROM by pressing F9 when prompted during POST to enter the utility. This tool is a function of the hardware/software system through RBSU. Verify that this tool is enabled through RBSU. The systems management drive must be loaded to activate ASR. Run from the ROMPaq diskette after powering up the system. Run from the SmartStart and Support Software CD.