HP ProLiant ML330e Compaq ProLiant ML330e/ ML330 Server Maintenance and Servic - Page 38
Removing a Memory Module
View all HP ProLiant ML330e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Removal and Replacement Procedures 2-25 Removing a Memory Module To remove a memory module: 1. Complete the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the front bezel. See "Front Bezel" earlier in this chapter. 3. Remove the access panel. See "Access Panel" earlier in this chapter. 4. Press outward on both latches of the memory module socket at the same time . This step releases the DIMM and pushes it partially out of the socket. 5. Lift the memory module from the socket . 1 2 1 Figure 2-22. Removing a memory module To replace a memory module, reverse steps 2 through 5.
Removal and Replacement Procedures
2-25
Removing a Memory Module
To remove a memory module:
1. Complete the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2. Remove the front bezel. See
“
Front Bezel
”
earlier in this chapter.
3. Remove the access panel. See
“
Access Panel
”
earlier in this chapter.
4. Press outward on both latches of the memory module socket at the same time
. This step
releases the DIMM and pushes it partially out of the socket.
5. Lift the memory module from the socket
.
1
1
2
Figure 2-22.
Removing a memory module
To replace a memory module, reverse steps 2 through 5.