HP ProLiant ML330e Compaq ProLiant ML330e/ ML330 Server Maintenance and Servic - Page 68
ATA Hard Drives (ProLiant ML330e Server), Table 5-5
![]() |
View all HP ProLiant ML330e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Physical and Operating Specifications 5-5 Table 5-4 IDE CD-ROM Specifications continued Laser parameters Type Semiconductor Laser GaA1As Wave length 780 ± 25 nm Divergence angle 53.5° ± 1.5° Output power 0.14 mW Operating conditions Temperature 5°C to 45°C (41°F to 113°F) Humidity 5% to 90% (10% to 80%) ATA Hard Drives (ProLiant ML330e Server) Table 5-5 ATA Hard Drive (ProLiant ML330e Server) Specifications Capacity Height Width Interface Transfer rate synchronous (max) Seek time (typical, including setting) Single track Average Full stroke Rotational speed Physical configuration Bytes/sector Operating temperature Celsius Fahrenheit 20 GB 7.2K rpm 20,020.0 MB 25.4 mm (1 in) 88.9 mm (3.5 in) ATA 100 16-bit 100 MBps 1.0 ms
![](/manual_guide/products/hewlettpackard-proliant-ml330e-compaq-proliant-ml330e-ml330-server-maintenance-service-guide-31b5f7c/68.png)
Physical and Operating Specifications
5-5
Table 5-4
IDE CD-ROM Specifications
continued
Laser parameters
Type
Semiconductor Laser GaA1As
Wave length
780
±
25 nm
Divergence angle
53.5
°
±
1.5
°
Output power
0.14 mW
Operating conditions
Temperature
5
°
C to 45
°
C (41
°
F to 113
°
F)
Humidity
5% to 90% (10% to 80%)
ATA Hard Drives (ProLiant ML330e Server)
Table 5-5
ATA Hard Drive (ProLiant ML330e Server) Specifications
20 GB 7.2K rpm
Capacity
20,020.0 MB
Height
25.4 mm (1 in)
Width
88.9 mm (3.5 in)
Interface
ATA 100 16-bit
Transfer rate synchronous
(max)
100 MBps
Seek time (typical, including
setting)
Single track
1.0 ms
Average
<
8.7 ms
Full stroke
<
20.0 ms
Rotational speed
7,200 rpm
Physical configuration
Bytes/sector
512
Operating temperature
Celsius
10
°
to 35
°
Fahrenheit
59
°
to 95
°