HP ProLiant ML330e Compaq ProLiant ML330e/ ML330 Server Maintenance and Servic - Page 35
Lift the lever, located on the side of the processor socket, to release the pins of
View all HP ProLiant ML330e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2-22 Compaq ProLiant ML330e/ML330 Server Maintenance and Service Guide 5. Press down and release the heatsink retainer clip to disengage one side from the processor socket . 6. Unhook the opposite side of the heatsink retainer clip from the processor socket , and then lift the heatsink/fan assembly from the processor socket . 7. Lift the lever, located on the side of the processor socket, to release the pins of the processor , and then pull the processor from the socket . 1 4 5 3 2 Figure 2-20. Removing the processor with heatsink To replace the processor with heatsink, reverse steps 2 through 7. IMPORTANT: The processor is keyed to ensure correct alignment.
2-22
Compaq ProLiant ML330e/ML330 Server Maintenance and Service Guide
5. Press down and release the heatsink retainer clip to disengage one side from the processor
socket
.
6. Unhook the opposite side of the heatsink retainer clip from the processor socket
, and
then lift the heatsink/fan assembly from the processor socket
.
7. Lift the lever, located on the side of the processor socket, to release the pins of the
processor
, and then pull the processor from the socket
.
4
1
5
3
2
Figure 2-20.
Removing the processor with heatsink
To replace the processor with heatsink, reverse steps 2 through 7.
IMPORTANT:
The processor is keyed to ensure correct alignment.