HP ProOne 600 Maintenance & Service Guide HP ProOne 600 G1 All-in-One - Page 16
Positioning the computer, Adjusting the height-adjustable/recline stand (optional)
View all HP ProOne 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Positioning the computer This computer may be shipped with no stand, with a height-adjustable stand, or a tilt/swivel stand. The computer may be placed in the landscape position with the HP logo on the bottom bezel or it may be placed in the portrait position with the HP logo on the right side, as you face the computer. CAUTION: Positioning the computer with the HP logo on the top or on the left is not supported. Adjusting the height-adjustable/recline stand (optional) This stand allows you to: ● adjust the computer height 110 mm (4.3 inches) ● rotate the computer position from landscape to portrait ● recline the computer backward up to +60 degrees ● tilt the computer to 30 degrees from the desktop ● swivel the computer up to 360 degrees right or left To rotate the computer: 1. Grasp the computer by the sides and lift it straight up (1) to its highest position. 2. Press the top of the computer backwards (2). CAUTION: The computer must be raised and tilted to provide clearance for rotating it. 3. Grasp the top right and bottom left of the computer and carefully turn it counterclockwise (3) until it is in the portrait position (4). 6 Chapter 1 Product features