HP ProOne 600 Maintenance & Service Guide HP ProOne 600 G1 All-in-One - Page 82
Fan, Remove the three Torx screws that secure the fan to the computer
View all HP ProOne 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Fan Description Fan Spare part number 698196-001 The fan is located near the middle of the computer and is secured with three Torx screws. You have to remove the VESA mounting adapter to remove the fan.. To remove the fan assembly: 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 33). 2. Remove the access panel (see Access panel on page 37). 3. Remove the stand (see Stand on page 39). 4. Remove the lower panel (see Lower panel on page 42). 5. Remove the VESA mounting adapter (see VESA mounting adapter on page 43). 6. Disconnect the fan cable from the system board connector labeled CHFAN (1). 7. Remove the three Torx screws that secure the fan to the computer (2). 8. Remove the fan from the computer (3). To install the fan assembly, reverse the removal procedures. 72 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis