HP ProOne 600 Maintenance & Service Guide HP ProOne 600 G1 All-in-One - Page 195
Illustrated Parts & Service Map IPSM., Computer Setup F10 Utility,
View all HP ProOne 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
4. Locate, press, and hold the CMOS button in for five seconds. NOTE: Make sure you have disconnected the AC power cord from the wall outlet. The CMOS button will not clear CMOS if the power cord is connected. NOTE: For assistance locating the CMOS button and other system board components, see the Illustrated Parts & Service Map (IPSM). 5. Replace the computer cover or access panel. 6. Reconnect the external devices. 7. Plug in the computer and turn on power. NOTE: You will receive POST error messages after clearing CMOS and rebooting advising you that configuration changes have occurred. Use Computer Setup to reset any special system setups along with the date and time. For instructions on Computer Setup, see Computer Setup (F10) Utility on page 99. Clearing and resetting the CMOS 185