HP ProOne 600 Maintenance & Service Guide HP ProOne 600 G1 All-in-One - Page 86
Positioning the cable above the power supply makes it easier to slide the power supply downward
View all HP ProOne 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
5. Remove the two Torx screws (1) that secure the power connector to the computer, and then lift the connector from atop the speaker (2). 6. Disconnect the cable from the system board connector (1). 7. Position the cable above the power supply (2). Positioning the cable above the power supply makes it easier to slide the power supply downward and out of the bracket that secures it. 76 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
5.
Remove the two Torx screws
(1)
that secure the power connector to the computer, and then lift the
connector from atop the speaker
(2)
.
6.
Disconnect the cable from the system board connector
(1)
.
7.
Position the cable above the power supply
(2)
.
Positioning the cable above the power supply makes it easier to slide the power supply downward
and out of the bracket that secures it.
76
Chapter 5
Removal and Replacement Procedures All-in One (AIO) Chassis