HP ProOne 600 Maintenance & Service Guide HP ProOne 600 G1 All-in-One - Page 88
System board
View all HP ProOne 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
System board Description System board for use in models without Windows 8 System board for use in models with Windows 8 Standard System board for use in models with Windows 8 Professional Spare part number 700629-001 700629-501 700629-601 The system board is located on the right side of the computer (viewed from the rear). It is secured with eight Torx screws. To remove the system board: 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 33). 2. Remove the access panel (see Access panel on page 37). 3. Remove the stand (see Stand on page 39). 4. Remove the lower panel (see Lower panel on page 42). 5. Remove the memory modules (see Memory on page 50). 6. Remove the graphics heat sink (see Graphics heat sink on page 61). 7. Remove the processor heat sink (see Processor heat sink on page 62). 8. Remove the processor (see Processor on page 64). 9. Remove the WLAN module (see WLAN module on page 67). 10. Disconnect all cables from the system board, noting their location for reinstallation. 78 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis