HP ProOne 600 Maintenance & Service Guide HP ProOne 600 G1 All-in-One - Page 45
Removing the rear I/O cover, Cable management cover
View all HP ProOne 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Removing the rear I/O cover Description Rear I/O cover Spare part number 732492-001 1. If a cable lock is installed on the rear of the unit, remove the lock. 2. Grasp the rear I/O cover, then pull it down and off the computer. NOTE: Removing the rear port cover may require that you use a significant amount of force. NOTE: If using forceful pressure on the ribs does not remove security cover, grip the exposed edge of the security cover by the AC plug and pull it straight out. Cable management cover 1. If the rear port cover is installed, remove the cover. 2. Route all peripheral cables through the stand opening and plug them into the appropriate ports as needed. Removing the rear I/O cover 35
Removing the rear I/O cover
Description
Spare part number
Rear I/O cover
732492-001
1.
If a cable lock is installed on the rear of the unit, remove the lock.
2.
Grasp the rear I/O cover, then pull it down and off the computer.
NOTE:
Removing the rear port cover may require that you use a significant amount of force.
NOTE:
If using forceful pressure on the ribs does not remove security cover, grip the exposed
edge of the security cover by the AC plug and pull it straight out.
Cable management cover
1.
If the rear port cover is installed, remove the cover.
2.
Route all peripheral cables through the stand opening and plug them into the appropriate ports as
needed.
Removing the rear I/O cover
35